ICP DAS USA I-7530 User Manual page 45

The uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

460800 bps baud rate of RS-232, only for I-7565

921600 bps baud rate of RS-232, only for I-7565

 Response: A valid command will let the module to apply the RS-

232/RS-485/RS- 422/USB configuration parameters.

Invalid command: ?<Error Code><CR>



Note:

It is necessary to enable the "Error Response" function in the CAN

Converter Utility, in order to receive Syntax and/or communication

error information at the host PC.

This function just supports firmware version 3.00 or more.

 Example:

Command: P20B30000<CR>

The module's RS-232/RS-485/RS-422/USB configuration will be

change to baud rate=115.2K, data bit=8, stop bit=1, none parity,

no checksum and no error responses. When CAN Converter

module was rebooted, the RS-232/RS-485/RS-422/USB

parameter will be recovered to the previous setting.

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 45

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Table of Contents

I-7530t I-7530-ft I-7530a Tm-7530 I-7565