ICP DAS USA I-7530 User Manual page 42

The uart to can bus converter

Hide thumbs Also See for I-7530:

Table of Contents

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ

 Response: A valid command will let the module write the RS-

232/RS-485/RS-422/USB parameters into the EEPROM

and then reboot the system.

Invalid command: ?<Error Code><CR>



Note:

It is necessary to enable the "Error Response" function in the CAN

Converter Utility, in order to receive Syntax and/or communication

error information at the host PC.

I-7565 supports only one 921600 baud rate on the firmware version

2.X or before.

 Example:

Command: P00B30000<CR>

Set the RS-232/RS-485/RS-422/USB baud rate=115.2K, data

bit=8, stop bit=1, none parity, no checksum and No error

responses into the CAN Converter module and then reboot the

CAN Converter module.

I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 42

+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Table of Contents

I-7530t I-7530-ft I-7530a Tm-7530 I-7565