ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
Test Interface:
Step 1. Set the Init/Normal DIP switch of the CAN converter to normal
mode, see the section 2.5.1. When the CAN module runs on
the normal mode, the run LED indicator will be turned on. If the
CAN converter sends or receives the CAN messages, the run
LED will flash once per message.
Step 2. Connect the COM port of PC to the CAN converter, and
execute the VxCAN Utility.
Step 3. Click the search button
connected to the PC.
Step 4. Afterwards, the searched CAN modules are listed in the left
window of the VxCAN Utility
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 29
to search all CAN converters