ICP DAS USA I-7530 User Manual page 55

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
Note: When you finish the driver installation, please unplug the USB
cable, and then plug the USB cable again
Verifying the Installation
This section will show you on how to verify whether the I-7565 was
properly installed. You will also need to determine the virtual COM port
assignment made by Windows for the USB to CAN converter.
Note: Before you connect the I-7565 for the first time, ensure that you do
not attach any serial devices to the converter. You must only connect the
I-7565 by itself.
To verify whether the device is properly installed and determine the COM
port assignment for the device:
"Start"  "Settings"  "Control Panel", then double click on the
1. Click
"System" icon. Once the System Properties window is display, click on
" Hardware"
tab and then click on the
click on Ports (COM & LPT). If the device was correctly installed, you
should now see the I-756X Converter device listing. This also means
that Windows has assigned the device to the COM3 port.
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 55
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
.
"Device Manager"
button. Double-