ICP DAS USA I-7530 User Manual page 24

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
If users want to get more information of the real baud rate,
click the "Advanced" button. Users can select the proper
parameters of the real baud rate for the applications.
The field "Sample Point" means the percent of the sampling
position of one bit data of the CAN message. The field
"SJW" is the short for synchronization jump width. It is used
to solve the problem of the phase shift between clock
oscillators of different CAN devices. Generally, the sample
point is set to close 87.5%, and the SJW is set to 1.
＊ Set CAN ID Filter: Click the button to pop up the
configuration dialog of the CAN ID filter. Users can use the
acceptance code and acceptance mask to determine the
accepted CAN messages by CAN message IDs.
About how to calculate the Acceptance Code and the
Acceptance Mask, please refer to the Appendix D.
I-7530, I-7530-FT, I-7530A, I-7565 User's Manual (Version 1.3, Apr/2015) -------- 24