Westfalia OSD 6-91-067 Instruction Manual page 99

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 109
Fig. 110
Fig. 111
Fig. 112
• Force off the sliding piston with the
aid of the eye bolt.
• Remove the sliding piston (with fit-
ted gasket) with bell-shaped piece
and eye bolt.
• Unscrew the four Allen screws hold-
ing the closing-chamber bottom and
the bowl bottom together.
• Screw the complete eye bolt into the
bell-shaped piece as shown.
• Screw the bell-shaped piece into the
thread of the annular piston.
• Force off annular piston and closing
chamber with the aid of the eye bolt.
99