Westfalia OSD 6-91-067 Instruction Manual page 95

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 93
Fig. 94
Fig. 95
Fig. 96
• Insert the pressure piece into the
spacer ring 1.
• Pull off the spacer ring with fitted
gaskets with the aid of a commercial
puller.
• Remove the following parts:
– centripetal pump 1 with inserted
gasket.
– sensing liquid pump 2 with in-
serted gaskets,
– regulating ring 3,
– centripetal pump chamber cover 5
with gaskets 4 and 6,
– centripetal pump 7 with inserted
gasket.
• Unscrew the spindle screw
– with a socket wrench and
– commercially available ratchet
(left-hand thread).
• Force the bowl
– at least 10 mm off the spindle
cone using an eye bolt and
– lift it out of the frame using a hoist.
95