Westfalia OSD 6-91-067 Instruction Manual page 137

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 211
Fig. 212
Fig. 213
• Use pliers to remove the retaining
ring.
Tool:
commercially available outer snap
pliers
• Pull off from the spindle:
– grooved ball bearing 1,
– Bearing cover 2,
– bearing cover 3.
Tool:
commercially available pulling de-
vice
If no commercial pulling device is
available:
• Clamp the spindle assembly be-
tween two assembly benches (see
sketches 1 and 2).
• Take the retaining ring out of the
spindle groove (see sketch 2).
• Place on a block of wood and lightly
hammer the spindle out of the seat
of the ball bearings.
• Be careful not to damage the spin-
dle.
Tools:
Inner snap pliers
Wooden block
Hammer
137