Westfalia OSD 6-91-067 Instruction Manual page 145

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 238
Fig. 239
Fig. 240
• Place distance bush on the ball
bearing inner ring.
• Carefully drive grooved ball bearing
1 with a suitable disk 2 up to the dis-
tance bush.
Disk 2 may only contact the outer
ring of grooved ball bearing 1.
Tools:
Disk (Ø 86 – 94 mm)
Wooden block
Hammer
• Insert retaining ring 2 180
relative to retaining ring 1 in the up-
per groove (danger of imbalance!).
145
o
offset