156
4.10
Before restarting
• Drain the slushing oil.
Observe the local regulations on disposal of the slushing oil.
• Check gaskets.
Replace damaged, very swollen, hardened or brittle gaskets immediately.
• Assemble bowl (see section 4.3.6).
• Check the ball bearings of the spindle and centrifugal clutch.
When damaged, replace the ball bearings immediately !
• Fit drive belt (see section 4.6.5 or 4.6.7).
• Fill the drive chamber with the specified lube oil as specified in section 4.2.3.
Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506