Westfalia OSD 6-91-067 Instruction Manual page 140

140
Fig. 221
Fig. 222
Fig. 223
Fig. 224
Westfalia Separator
Mineraloil Systems GmbH
• Arrest the clutch driver 1 with an
open-ended wrench.
• Unscrew hex head screw 2 from the
motor shaft end.
• Take off washer 3.
• Arrest the clutch driver 1 with an
open-ended wrench and,
for protecting the motor shaft
end:
• Screw threaded pin 2 (M 10x20) into
the threading of the motor shaft end.
• Screw the eye bolt into the clutch
driver.
• Arrest the clutch driver with an
open-ended wrench.
• Force the centrifugal clutch off the
motor shaft end by turning the eye
bolt clockwise.
• Remove eye bolt 1 from the clutch
driver and cylindrical screw 2 from
the motor shaft end.
2058-9001-101 / 0506