Westfalia OSD 6-91-067 Instruction Manual page 146

146
Fig. 241
Fig. 242
Fig. 243
Fig. 244
Westfalia Separator
Mineraloil Systems GmbH
• Turn
clutch pulley
grooved ball bearings through 180
• Place the ball bearing inner ring on
disk 1.
Tool:
Disk (Ø 61 – 69 mm)
• Distance bush 1 must be flush with
the inner rings of the two grooved
ball bearings.
• Carefully hammer the clutch driver
into the grooved ball bearing with
light blows using a rubber hammer.
• Turn the clutch pulley through 180
• Fit the retaining ring in the groove of
the clutch driver.
2058-9001-101 / 0506
with fitted
o
.
o
.