Westfalia OSD 6-91-067 Instruction Manual page 131

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
• For standard tools, see section 4.11.
• Do not use force when removing or fitting parts.
• Treat all drive parts
– Treat gently.
– Always set them down on a rubber mat or a wooden pallet.
• Before fitting the drive parts
– Thoroughly clean and dry the drive chamber.
Use only a cleaning agent that is approved for the field of application!
– Check the ball bearings of the spindle and centrifugal clutch.
Use only the ball bearings specified in the parts list!
To avoid bearing damage,
• always operate the separator with installed bowl!
131