Westfalia OSD 6-91-067 Instruction Manual page 135

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 206
Fig. 207
Fig. 208
If necessary:
• Unscrew three hex head screws 1
and
• take the bearing cover 2 (with glued-
in hex head screw) out of the lower
section of frame.
If necessary:
• Take out gasket 1.
If necessary:
• Take retaining ring 1 out of the
pivoting bearing groove.
Tool:
commercially available inner snap pli-
ers with offset jaws
135