Westfalia OSD 6-91-067 Instruction Manual page 126

126
Fig. 189
Fig. 190
Fig. 191
Westfalia Separator
Mineraloil Systems GmbH
If the gaskets 2 have been removed
to keep to the service intervals:
• Provide handle connection piece 1
with new gaskets 2.
• Apply a thin coat of grease to the
guide surfaces and threads of the
handle connection piece as speci-
fied in the lubrication schedule (see
4.2.4).
• Introduce handle connection piece 1
into the hood and
• Screw it down to fasten the centripe-
tal pump (left-hand thread).
To do this, use offset wrench 2.
• Connect water feed line 1.
2058-9001-101 / 0506