Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 198
Fig. 199
Fig. 200
Fig. 201
• Pull the motor out of the flange
guide by means of the hoist (approx.
5 mm).
(Drive belt is slackened!)
• Pull the drive belt off the belt pulley
(centrifugal clutch) downwards.
• Lift the motor with centrifugal clutch
out of the lower section of frame.
• Remove the operating water con-
nection in the upper section of
frame:
– Unscrew union 1.
• Unscrew four hex head screws 1 of
the operating water feeding system.
133