152
4.7
Height adjustment
For reasons of operating reliability, adjustment of
• bowl height
• and centripetal pump play
must be performed with particular care.
4.7.1 Bowl height
The bowl height
• must not be adjusted on this separator!
• may only be measured with fitted drive belt!
Fig. 261
A bowl height check is necessary, e.g.
• after replacing the drive parts,
• after fitting another bowl,
• after fitting a different centripetal pump,
• as soon as the centripetal pump exhibits grinding marks.
If it does prove necessary to readjust the bowl height, consult the factory.
Westfalia Separator
Mineraloil Systems GmbH
The control dimension A
– is 25.5 ±2 mm
– between upper edge of bowl lock
ring and upper section of frame.
2058-9001-101 / 0506