Westfalia OSD 6-91-067 Instruction Manual page 134

134
Fig. 202
Fig. 203
Fig. 204
Fig. 205
Westfalia Separator
Mineraloil Systems GmbH
• Take the operating water feeding
system out of the upper section of
the frame.
• Take the drive belt out of the lower
section of frame.
• Undo three hex head screws 1.
• Unscrew spindle assembly 2 from
the lower section of the frame.
(For dismantling the spindle assem-
bly, see section 4.6.3.)
If the vibration absorber is also pulled out
of the lower section of the frame:
•
Loosen it from the spindle assembly by
striking the spindle on a wooden base.
• Remove from the lower section of
frame:
– Gasket 1
– Rubber-metal cushion 2
2058-9001-101 / 0506