Speed And Starting Time Of The Bowl - Westfalia OSD 6-91-067 Instruction Manual

78

4.1.5 Speed and starting time of the bowl

Speed
– for densities of the product up to
max. 1.05 kg/dm
– for densities of the separated solids up to max.
1.4 kg/dm
Starting time
The bowl speed has been rated so as to ensure the operating safety of the
separator.
If the densities exceed those stated above, check with the factory.
Fig. 78
Fig. 79
3
and
3
Westfalia Separator
Mineraloil Systems GmbH
See nameplate
approx. 2 - 4 min
• Check spindle speed (= bowl speed)
with a hand tachometer:
– Before initial start-up.
• Do not exceed the maximum
spindle running time of 1 minute!
• Make this check before installing
the bowl.
• Speed deviations up to 5 % are ad-
missible.
Important instructions
• When the bowl has been removed,
no oil must spill onto the drive belt
via the spindle.
• After removing the bowl, place a
cloth over the spindle immediately.
2058-9001-101 / 0506