Westfalia OSD 6-91-067 Instruction Manual page 107

Westfalia Separator
Mineraloil Systems GmbH
2058-9001-101 / 0506
Fig. 128
Fig. 129
Fig. 130
Fig. 131
• For replacing the polyamide gasket
1 see section 4.3.7.
• Insert gasket 2 in the annular piston.
• Grease guide surfaces as specified
in the lubrication schedule (see
4.2.4).
• Install annular piston 1 in the bowl
bottom 2.
• Turn the sliding piston through 180
(upside down).
• Fit sliding piston 1 together with
plate 2 and complete eye bolt 3 as
shown.
• Press the annular piston 1 into the
bowl bottom with the aid of nut 2.
107
o