SuperServer 6029TP-HTR/HC0R/HC1R User's Manual
Use this feature to remove an EFI boot option from the boot priority list.
Add New Driver Option
Use this feature to select a new driver to add to the boot priority list.
Add Driver Option
Use this feature to specify the name of the driver that the new boot option is added to.
Path for Drover Option
Use this feature to specify the path to the driver that the new boot option is added to.
Driver Option File Path
Use this feature to specify the file path of the driver that the new boot option is added to.
Create
After the driver option name and the file path are set, press <Enter> to enter to submenu
and click OK to create the new boot option drive.
Delete Driver Option
Use this item to select a boot driver to delete from the boot priority list.
Delete Drive Option
Select the target boot driver to delete from the boot priority list.
Hard Disk Drive BBS Priorities
•
Boot Option #1 - #5
Network Drive BBS Priorities
•
Boot Option #1
USB Key Drive BBS Priorities
•
Boot Option #1
UEFI Hard Disk Drive BBS Priorities
•
Boot Option #1
UEFI USB Key Drive BBS Priorities
•
Boot Option #1
UEFI Application Boot Priorities
•
Boot Option #1
108
6.8 Save & Exit
Select the Save & Exit tab from the BIOS setup screen to configure the settings below.
Save Options
Discard Changes and Exit
Select this option to quit the BIOS setup without making any permanent changes to the
system configuration and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes and Reset
When you have completed the system configuration changes, select this option to leave the
BIOS setup utility and reboot the computer for the new system configuration parameters to
take effect. Select Save Changes and Exit from the Exit menu and press <Enter>.
Save Changes
When you have completed the system configuration changes, select this option to save all
changes made. This will not reset (reboot) the system.
109
Chapter 4: BIOS