Supermicro SuperServer 6029TP-HTR User Manual page 54

SuperServer 6029TP-HTR/HC0R/HC1R User's Manual
•
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
VLAN: Select Enabled to enable IPMI VLAN support. The options are Enabled and Dis-
abled.
IPV6 Support
Select Enabled for IPV6 support. The options are Enabled and Disabled.
Configuration Address Source
Use this feature to select the IP address source for this computer. If Static is selected, you
will need to know the IP address of this computer and enter it to the system manually in the
field. If DHCP is selected, AMI BIOS will search for a DHCP (Dynamic Host Configuration
Protocol) server attached to the network and request the next available IP address for this
computer. The options are Unspecified, DHCP and Static.
The following features will be displayed:
•
Current Configuration Address Source
•
Station IPV6 Address
•
Prefix Length
•
IPV6 Router1 IP Address
•
IPV6 Address Status
•
IPV6 DHCP Algorithm
102
6.6 Security Settings
This menu allows the user to configure the following security settings for the system.
Administrator Password
Use this feature to set the administrator password which is required to enter the BIOS setup
utility. The length of the password should be from 3 characters to 20 characters long.
User Password
Use this feature to set the user password which is required to enter the BIOS setup utility.
The length of the password should be from 3 characters to 20 characters long.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the system
to check for a password at bootup or upon entering the BIOS Setup utility. The options are
Setup and Always.
HDD Security Configuration:
P4: Intel SSDSC2BB160G4
103
Chapter 4: BIOS