Ports - Supermicro SuperServer 6029TP-HTR User Manual

SuperServer 6029TP-HTR/HC0R/HC1R User's Manual

4.3 Ports

See Figure 4-1 below for the locations and descriptions of the various I/O ports on the rear
of the motherboard.
IPMI_LAN UID_LED1
VGA
JUIDB1
PHY
COM1
BMC
BATTERY
JSDCARD1
SIOM:CPU1 PCI-E 3.0 X16
BT1
JBT1
BMC SD CARD
HDD_LED
PCH
SXB2
CPU1
BIOS
LICENSE
X11DPT-PS
Rev. 1.10
SXB1
CPU2
Figure 2-2. I/O Port Locations and Definitions
2
1 3
Rear I/O Ports
# Description
1. USB 0 (3.0)
2. USB 1 (3.0)
3. Unit Identifier (UID) Switch (JUIDB1)
4. VGA
5. IPMI LAN
60
JSIOM1
4 5
VGA Port
The onboard VGA port is located next to IPMI_LAN on the I/O back panel. Use this connection
for VGA display.
Serial Port
A COM port (COM1) is located next to the VGA port on the motherboard. This COM port
provides serial communication support. See the table below for pin definitions.
COM Port
Pin Definitions
Pin# Definition Pin#
1 DCD 6
2 RXD 7
3 TXD 8
4 DTR 9
5 Ground 10
Universal Serial Bus (USB) Ports
Two USB 3.0 port (USB0/1) are located on the I/O back panel. Connect appropriate cables
here to use USB support. (USB cables are not included).
Back Panel USB (3.0)
Pin Definitions
Pin# Definition Pin# Definition
1 VBUS 10 Power
2 D- 11 USB 2.0 Differential Pair
3 D+ 12
4 Ground 13 Ground of PWR Return
5 StdA_SSRX- 14 SuperSpeed Receiver
6 StdA_SSRX+ 15 Differential Pair
7 GND_DRAIN 16 Ground for Signal Return
8 StdA_SSTX- 17 SuperSpeed Transmitter
9 StdA_SSTX+ 18 Differential Pair
61
Chapter 4: Motherboard Connections
Definition
DSR
RTS
CTS
RI
N/A