Front Features - Supermicro SuperServer 6029TP-HTR User Manual

SuperServer 6029TP-HTR/HC0R/HC1R User's Manual
Control Panel Features
Item Feature Description
The main power button on each of the control panels is used to apply or
remove power from the power supply to associated node Turning power to the
1 Power Button system off with this button removes the main power, but keeps standby power
supplied to the system. The power button has a built-in LED which will turn
green when the power is on
2 NIC1 LED This LED indicates network activity on either LAN1 or LAN2 when flashing.
3 Information LED See the following table for the status shown by this LED.
When used with a UID compatible motherboard, the UID button is used to turn
on or off the blue light function of the LED. This light is displayed in the front
4 UID Button
as part of the UID button and with a separate LED at the rear of the node. The
light helps locate the node in large racks and server banks.
Information LED
Status Description
Continuously on and red An overheat condition has occurred. (This may be caused by cable congestion.)
Blinking red (1 Hz) Fan failure: check for an inoperative fan.
Blinking red (0.25 Hz) Power failure: check for an inoperative power supply.
Solid blue Local UID has been activated. Use this function to locate the server in a rack environment.
Blinking blue (300 Msec) Remote UID has been activated. Use this function to locate the server from a remote location.
12

Front Features

The SC827HQ+-R2K04BP3 is a mini 2U chassis See the illustration below for the features
included on the front of the chassis.
1
1
2
Figure 1-2. Chassis Front View
Front Chassis Features
Item Feature Description
Four control panels are provided on the chassis front for each node in the
1 Control Panels (each Node)
system.
Twelve drive bays for 2.5" drives are provided on the chassis front, three for
2 Drive Bays
each node.
13
Chapter 1: Introduction
1
1