Interface Board Features - Rabbit MiniCore RCM5700 User Manual

Distributor of Digi International: Excellent Integrated System Limited
Datasheet of 101-1274 - KIT DEV STANDARD RCM5700
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
B.1.1 Interface Board Features
• Power Connection
connection or through a power supply jack, J6. A chip at U4 disconnects the USB power sup-
ply from the rest of the Interface Board when power is supplied through jack J6
Users providing their own power supply should ensure that it delivers +5 V DC at 10 W.
• Regulated Power Supply
ulator provides stable power to the MiniCore module and other boards connected to it.
—The power LED lights whenever power is connected to the Interface Board.
• Power LED
—A momentary-contact, normally open switch is connected directly to the Mini-
• Reset Switch
Core's pin. Pressing the switch forces a hardware reset of the system.
/RESET_IN
• Mini USB Connector
to your PC to enable you to program your MiniCore module.
• Mini PCI Express socket
to enable you to install your MiniCore module. There is a snap-in holder to hold the opposite
end of the MiniCore module firmly in place.
• I/O Switch and LED
the MiniCore module and may be read as an input by sample applications.
One LED is connected to PD0 on the MiniCore module, and may be driven as an output indica-
tor by sample applications.
—One 10/100Base-T Ethernet port is available on the Interface Board with an RJ-45
• Ethernet
jack at J3. and
LNK ACT
MiniCore RCM5700/RCM6700 User's Manual
—Power is supplied to the Interface Board either from the PC via the USB
—The raw DC voltage is routed to a 3.3 V linear regulator. The reg-
—A USB cable is used to connect the MiniCore via the Interface Board
—The Interface Board provides a 52-pin mini PCI Express socket
—One momentary-contact, normally open switch is connected to PD1 on
LEDs indicate a live Ethernet link and Ethernet activity.
digi.com
59