Table 6. Administrative Commands; Table 7. Maintenance Commands - ADTRAN H2TU-C Installation And Maintenance Practice

TL1 Commands H2TU-C Options
ED-HDSL PRM Setting
ED-HDSL Network Keep Alive
1. Some settings may not be available at the H2TU-R.
2. This option is only available if the H2TU-R P/N 1221026L1, 1222026L1, 1223026L1 is used in the circuit.
3. This option is not available if the H2TU-R P/N 1221026L1, 1222026L1, 1223026L1 is used in the circuit.
TL1 Commands
RMV-HDSL
RST-HDSL2
ENT-EQPT
DLT-EQPT
ED-HDSL or ED-T1
TL1 Commands
INIT-REG-HDSL or INIT-REG-T1
RTRV-PM-HDSL or RTRV-PM-T1
RTRV-ALM-HDSL
Table 5. HDSL and T1 Provisioning Options (Continued)
Corresponding
Litespan
Parameter
LPBKACTC
NTWKKPALV

Table 6. Administrative Commands

Description
Removes the Litespan H2TU-C from service (OOS)
Restores the Litespan H2TU-C to service (IS)
Enters or assigns a module to a slot position
Deletes or usassigns a module from a slot position
Edits the equipment

Table 7. Maintenance Commands

Description
Clears performance monitoring data and sets all values to zero (0)
Retrieves performance monitoring data
Retrieves alarms
H2TU-C Corresponding
Available Litespan Setting
Setting
None 0000000000000000
SPRM 0000000000000001
NPRM 0000000000000010
Auto (Both) 0000000000000011
Disabled NO
Enabled YES
Pre-Configurable
Value
0000000000000001
NO