ADTRAN H2TU-C Installation And Maintenance Practice page 33

1. The semicolon (;) is the message terminator. Entry of a semicolon prompts immediate
issue of the preceding string for execution.
2. Colons (:) are data block delimiters. They enclose and separate data blocks that are
composed of one or more parameters (data units).
3. Commas (,) are parameter delimiters. They enclose and separate parameter fields within
data blocks.
4. Double quotes (") enclose formatted text, especially that which is to be passed to
multivalent parameter fields (such as CONDREC, the condition record parameter).
In CLI mode, the command code is entered first. Do not press
its parameters all together.
The TL1 command code is followed by its parameter list. Parameters are arranged in blocks,
which may consist of one or more parameters, and supply all data necessary for execution.
Parameter values must be supplied in the proper order, with each block preceded by a colon (:)
and parameters within blocks separated by commas (,). The colon serves to position block
values correctly in the command string; even blocks for which no values are required must be
indicated with colons, so that the next values are properly positioned. Default values may be
accepted by use of a colon without a value.
For command codes followed by the terminator semicolon (;) where no data blocks are entered,
default values for parameters are supplied by the system unless parameter entry is required,
in which case an error message is displayed.
After entering a command with all the specified options, the system displays the
prompt. Enter
EXECUTE?[NO]=
execute command is always negative
not execute the command.)
61221002L1-5F
Appendix B, Litespan H2TU-C Provisioning Tutorial - Overview of TL1 Structure
or to execute the command. (The default option for the
Y YES
. Pressing the
(NO)
; enter the command and
E
NTER
key without typing
E
NTER
or does
Y YES
B-3