ADTRAN H2TU-C Installation And Maintenance Practice page 54

Litespan H2TU-C Installation and Maintenance Practice
Menu Access: Main Menu → 2. Maintenance Menu → 6. HDSL Maintenance Menu →
5. RTRV-ALM-HDSL
Note: Standing alarms are not retrieved for facilities that are out of service for maintenance (OOS-MT).
Code
<TID>
<AID>
<CTAG>
<GB>
<NTFCNCDE>
<CONDTYPE>
<SRVEFF>
<LOCN>
<DIRN>
<TMPER>
System Response:
/* <number> Alarms On <number> HDSL Facilities Retrieved */
B-24
Table B-14. Retrieve HDSL Alarms (Continued)
Command: RTRV-ALM-HDSL
Parameter Usage
Definition
Target ID
Access ID
Correlation tag
General block
Notification code
Condition type
Service affect
Location
Direction
Time period
Description
No user entry needed. Default = connected terminal.
Enter <TERMINAL>-<BANK>-<SLOT>[-<Locn>-<Loop>]
for a list of standing HDSL alarms (if any) for the
facilities specified. Optional field [-<Locn>-<Loop>] is
included in the case of LPBK,PM Commands.
Default = ALL.
No user entry needed.
Default = 0.
Parameter not allowed.
Used to retrieve a list of the alarms of the severity
indicated.
Options: CR, MJ, MN, or NR. Default = ALL.
Used to retrieve a list of the alarms of the type indicated.
Options: MSGLOST, LOSW, DCCONT, T-SNRL, T-BER,
AIS, LOS, OGAIS, T-BERL-L, T-BERL-P, T-BERL-H,
PATTERNDETECT, YEL, INCRAI-CI, T-LA.
Default = ALL.
Used to retrieve a list of the alarms with the service
affect indicated.
Options: SA, NSA, ALL. Default = ALL.
Not supported.
Not supported.
Not supported.
61221002L1-5F