ADTRAN H2TU-C Installation And Maintenance Practice page 49

Appendix B, Litespan H2TU-C Provisioning Tutorial - Selected TL1 Commands for Provisioning, Maintenance, and Testing
Table B-10. Retrieve T1 Performance Monitoring (Continued)
<AID>
<CTAG>
<GB>
<MONTYPE>
<MONLEV>
<LOCN>
<DIRN>
<TMPER>
<MONDAT>
<MONTM>
System Response:
/* Performance Data On <number> T1 Facilities Retrieved */
61221002L1-5F
Command: RTRV-PM-T1
Access ID Enter <TERMINAL>-<BANK>-<SLOT> to retrieve
performance monitoring data for the facilities specified.
Default = ALL.
Correlation tag No user entry needed. Default = 0.
General block Parameter not allowed.
Monitored type Enter the monitored parameter type for which PM data
will be retrieved. Options: MS, CVL, ESL, LASL, SESL,
UASL, USSL, CSSP, CVP, ESP, SEFSP, SESP, UASP,
BERL, LOSSL, B8ZSSL, PDVSL, or ALL.
Default = ALL.
Monitored level Data exceeding the level specified by this field will be
retrieved. For example, a value of 4 will retrieve data
only for events occurring 4 times or more.
Default = 0 (all data retrieved).
Location Options: NEND, FEND
Enter NEND (near end) for Network data.
Enter FEND (far end) for Customer data.
Direction Not supported.
Time period Enter the time period for which data is retrieved.
Options: 1-DAY, 1-HR, 15-MIN.
Monitored date Used to specify the date from which data is retrieved.
Enter
Example
Monitored time Used to specify the time of day for which data is
retrieved.
Enter
Example
<MM>-<DD> && <MM>-<DD>.
<MM> = 1-12, <DD> = 1-31
<HH>-<MM> && <HH>-<MM>.
HH> = 0-23, <MM> = 0-59.
B-19