Edit Hdsl Grade Of Service; Table B-11. Edit Hdsl Grade Of Service - ADTRAN H2TU-C Installation And Maintenance Practice

Litespan H2TU-C Installation and Maintenance Practice

Edit HDSL Grade of Service

To modify the grade-of-service tables for an existing HDSL facility, use the command ED-GOS-
HDSL.
(See Table B-11 for details on this command.)
Function: This command allows modification of grade-of-service tables for HDSL facilities. GOS
tables allow performance monitoring threshold levels for various alarms/event
conditions to be set. Fifteen GOS tables are available for each type of service.
Input format:
ED-GOS-HDSL:<TID>:<AID>:<CTAG>:::<MONTYPE>,<THLEV>,<TMPER>;
Example:
ED-GOS-HDSL::COT-GOS2::::SESCVS,200,15-MIN;
Menu Access: Main Menu → 3. Provisioning Menu → 6. HDSL Provisioning Menu →
6. ED-GOS-HDSL
Note: Only tables already been entered in the database can be edited. To edit the entire GOS table, the ED-GOS
command must be issued for each monitored type. The parameters for only one monitored type are edited
each time the command is issued; the remainder of the monitored values are unchanged.
Code
<TID>
<AID>
<CTAG>
<GB>
<CB>
<MONTYPE>
<THLEV>
<TMPER>
<PST>
B-20

Table B-11. Edit HDSL Grade of Service

Command: ED-GOS-HDSL
Parameter Usage
Definition Description
Target ID No user entry needed.
Default = connected terminal.
AID of GOS table Enter <Terminal>-GOS<GosNum>.
to edit
Correlation tag No user entry needed.
Default = 0.
General block Parameter not allowed.
Common block Parameter not allowed.
Monitored Used to specify the type of monitored HDSL parameter.
parameter type
Options: ES, SES, UAS, LA, SESCVS, BER, SNR,
LOSWS, CV. Default = no change.
Threshold level Each monitored type has its own threshold level.
Default = no change.
Time period Used to specify the time period for collection of GOS
data.
Options: 1-DAY, 1-HR, 15-MIN.
Primary service Parameter not allowed.
state
61221002L1-5F