Retrieve T1 Performance Monitoring; Table B-10. Retrieve T1 Performance Monitoring - ADTRAN H2TU-C Installation And Maintenance Practice

Litespan H2TU-C Installation and Maintenance Practice
<GB>
<MONTYPE>
<MONVAL>
<LOCN>
<TMPER>
<MONDAT>
<MONTM>
System Response:
/* Registers Initialized On <number> T1 Facilities */

Retrieve T1 Performance Monitoring

To retrieve performance-monitoring data recorded for a designated T1 facility, use the
command RTRV-PM-T1.
(See Table B-10 for details on this command.)

Table B-10. Retrieve T1 Performance Monitoring

Function: Retrieves performance-monitoring data recorded for the designated T1 facilities.
Input format:
RTRV-PM-T1:<TID>:<AID>:<CTAG>::<MONTYPE>,<MONLEV>,<LOCN>,<DIRN>,<TMPER>,
<MONDAT>,<MONTM>;
Example:
RTRV-PM-T1::COT-1-13:::CVL,,,,1-DAY,7-22,14-00;
Menu Access: Main Menu → 2. Maintenance Menu → 20. T1 Maintenance Menu → 15. RTRV-PM-T1
Code
<TID>
B-18
Table B-9. Initialize T1 Register (Continued)
Command: INIT-REG-T1
General block Parameter not allowed.
Monitored type Enter the monitored parameter type to specify the
performance-monitoring registers to be initialized.
Options: MS, CVL, ESL, LASL, SESL, UASL, USSL,
CSSP, CVP, ESP, SEFSP, SESP, UASP, BERL, LOSSL,
B8ZSSL, PDVSL or ALL. Default = ALL.
Monitored value Parameter not allowed.
Location Options: NEND, FEND
NEND (near end) for Network performance-monitoring
registers.
FEND (far end) for Customer performance-monitoring
registers.
Time period Enter the time period for which PM registers are
initialized.
Options: 1-DAY, 1-HR, 15-MIN.
Monitored date Parameter not allowed.
Monitored time Parameter not allowed.
Command: RTRV-PM-T1
Parameter Usage
Definition Description
Target ID No user entry needed. Default = connected terminal.
61221002L1-5F