Table B-3. Retrieve T1 - ADTRAN H2TU-C Installation And Maintenance Practice

Litespan H2TU-C Installation and Maintenance Practice
Function: Used to retrieve the service provisioning information for T1 facilities.
Input format:
RTRV-T1:<TID>:<AID>,<TYPE>:<CTAG>:::<PARAM>:<PST>,<SST>;
Example:
RTRV-T1::RT-2-15;
Menu Access: Main Menu → 3. Provisioning Menu → 15. T1 Provisioning Menu → 8. RTRV-T1
Code Definition
<TID> Target ID
<AID> Access ID
<TYPE> Type of unit
<CTAG> Correlation tag
<PARAM> Parameters to be
retrieved
<PST> Primary service state
<SST> Secondary service
state
System Response:
/* <number> T1 Facilities Retrieved */
6. Unassign the current module type for the slot; type
DLT-EQPT::<TERMINAL>-<BANK>-<SLOT>;
(See Table B-4 for details on the DLT-EQPT command.)
B-8

Table B-3. Retrieve T1

Command: RTRV-T1
Parameter Usage
Description
No user entry needed. Default = connected terminal.
Enter <TERMINAL>-<BANK>-<SLOT> of T1s to be retrieve.
Not required.
No user entry needed. Default = 0.
Not required.
Options: IS or OOS. Default = no change.
A channel unit that is redlined (RDLD) cannot be deleted or
placed in the OOS-MA state.
Options: RDLD or NOT-RDLD.
61221002L1-5F