Selected Tl1 Commands For Provisioning, Maintenance, And Testing; Edit T1 Grade Of Service; Table B-8. Edit T1 Grade Of Service - ADTRAN H2TU-C Installation And Maintenance Practice

Litespan H2TU-C Installation and Maintenance Practice
SELECTED TL1 COMMANDS FOR PROVISIONING, MAINTENANCE,
AND TESTING
The following commands are used to perform provisioning, maintenance, and testing tasks on
T1 and HDSL facilities as they relate to the Litespan H2TU-C. For additional information on
these commands, refer to the applicable table associated with a specific command.

Edit T1 Grade of Service

Another aspect of provisioning the Litespan H2TU-C involves the modification of T1 grade-of-
service tables to set performance-monitoring threshold levels for various alarm/event condi-
tions. To modify an existing T1 GOS table, use the command ED-GOS-T1. The selection of
appropriate parameter options will depend upon the Company-specific requirements.
(See Table B-8 for details on this command.)
Function: This command Allows modification of grade-of-service tables for T1 facilities. GOS
tables allow performance monitoring threshold levels for various alarms/event
conditions to be set. Fifteen GOS tables are available for each type of service.
Input format:
ED-GOS-T1:<TID>:<AID>:<CTAG>:::<MONTYPE>,<THLEV>,<TMPER>;
Example:
ED-GOS-HDSL::COT-GOS2::::SESL,50,1-HR;
Menu Access: Main Menu → 3. Provisioning Menu → 15. T1 Provisioning Menu → 3. ED-GOS-T1
Note: Only tables already in the database can be edited. The parameters for only one monitored type are edited
each time the command is issued; the remainder of the monitored values are unchanged. To edit the entire
GOS table, the ED-GOS command must be issued for each monitored type.
Code
<TID>
<AID>
<GB>
<CB>
<CTAG>
<MONTYPE>
B-16

Table B-8. Edit T1 Grade of Service

Command: ED-GOS-T1
Parameter Usage
Definition Description
Target ID No user entry needed.
Default = connected terminal.
AID of GOS table Enter <Terminal>-GOS<GosNum>.
to edit
General block Parameter not allowed.
Common block Parameter not allowed.
Correlation tag No user entry needed.
Default = 0.
Monitored Used to specify the type of monitored T1 parameter.
parameter type
Options: BERL-L, BERL-P, BERL-H, CSSP, CVL, CVP,
ESL, ESP, LASL, SEFSP, SESL, SESP, UASL, UASP,
USSL, B8ZSSL, LOSSL, PDVSL, SESCVSL, SESCVSP.
Default = no change
61221002L1-5F