Rate Limiting - Planet ISW-1022M User Manual

5.5.5 Rate Limiting

You can set up every port's bandwidth rate and frame limitation type.
Ingress Limit Frame type: select the frame type that wants to filter. There are four frame types for selecting:
All
Broadcast/Multicast/Flooded Unicast
Broadcast/Multicast
Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast only types are only for ingress
frames. The egress rate only supports All type.
All the ports support port ingress and egress rate control. For example, assume port 1 is 10Mbps, users can
set it's effective egress rate is 1Mbps, ingress rate is 500Kbps. The switch performs the ingress rate by packet
counter to meet the specified rate
Ingress: Enter the port effective ingress rate (The default value is "0").
Egress: Enter the port effective egress rate (The default value is "0").
And then, click
Figure 5-29 Rate Limiting interface
Apply
to apply the settings
User's Manual of ISW-1022M
64