Table of Contents
Advertisement
Hybrid Link
1.
2.
Pull down the selection item and focus on 802.1Q then press
802.1Q mode
You can see the link type, untagged VID, and tagged VID information of each port in the table below on the
screen.
Group Configuration
Edit the existing VLAN Group.
Select the VLAN group in the table list.
Edit
Click
It's not necessary to type '1' in the tagged VID. The hybrid port will forward the frames of
VLAN 1.
The trunk port has to be connected to a trunk/hybrid port of the other switch. Both the
tagged VID of the two ports have to be the same.
Figure 5-35 802.1Q VLAN interface
.
User's Manual of ISW-1022M
Apply
to set the VLAN Operation Mode in
75
Advertisement
Table of Contents
