Port Commands Set - Planet ISW-1022M User Manual

no security telnet

6.2 Port Commands Set

Netstar Commands
interface fastEthernet
[Portid]
duplex
[full | half]
speed
[10|100|1000|auto]
no flowcontrol
security enable
no security
bandwidth type all
bandwidth type
broadcast-multicast-flooded-uni
cast
bandwidth type
broadcast-multicast
bandwidth type broadcast-only
server
G Disable IP security of telnet
server
Level Description
G Choose the port for
modification.
I Use the duplex configuration
command to specify the
duplex mode of operation for
Fast Ethernet.
I Use the speed configuration
command to specify the speed
mode of operation for Fast
Ethernet., the speed can't be
set to 1000 if the port isn't a
giga port..
I Disable flow control of
interface
Enable security of interface
I
I Disable security of interface
I Set interface ingress limit
frame type to "accept all
frame"
I Set interface ingress limit
frame type to "accept
broadcast, multicast, and
flooded unicast frame"
I Set interface ingress limit
frame type to "accept
broadcast and multicast
frame"
I Set interface ingress limit
frame type to "only accept
broadcast frame"
121
User's Manual of ISW-1022M
switch(config)#no security telnet
Example
switch(config)#interface fastEthernet 2
switch(config)#interface fastEthernet 2
switch(config-if)#duplex full
switch(config)#interface fastEthernet 2
switch(config-if)#speed 100
switch(config-if)#no flowcontrol
switch(config)#interface fastEthernet 2
switch(config-if)#security enable
switch(config)#interface fastEthernet 2
switch(config-if)#no security
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type all
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast-flooded-unicast
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-multicast
switch(config)#interface fastEthernet 2
switch(config-if)#bandwidth type
broadcast-only