Table of Contents
Advertisement
Enable Couple Ring:
Enable Dual Homing:
Enable Dual Ring:
When the X-Ring function enabled, the user must disable the RSTP. The X-Ring function and
RSTP function cannot exist on a switch at the same time.
Remember to execute the "Save Configuration" action, otherwise the new configuration will
lose when switch powers off.
the backup port. When 1
nd
upgrade the 2
Ring Port to be the working port.
To enable the couple ring function, tick the checkbox beside the Enable Couple
Ring string label.
Couple Port: Assign the member port which is connected to the other
ring group.
Control Port: When the Enable Couple Ring checkbox is ticked, you
have to assign the control port to form a couple-ring group between the
two X-rings.
Set up one of the ports on the switch to be the Dual Homing port. For a switch,
there is only one Dual Homing port. Dual Homing function works only when the
X-Ring function enabled.
When this check box is ticked, the 'Enable Ring Master' check box will then also
be enabled by the system, which means this equipment is assigned as the Ring
Master. The Dual Ring differs from the Couple Ring in that it only needs a unit to
form a redundant linking system of two rings.
106
User's Manual of ISW-1022M
st
Ring Port fails, the system will automatically
Advertisement
Table of Contents
