Table of Contents
Advertisement
Console Interface
Power Supply
Power Consumption
Operating Temperature
Operating Humidity
Storage Temperature
Case Dimension
Management Functions
Management Interface
Port Configuration
Port Status
VLAN
Spanning Tree
Link Aggregation
QoS
IGMP Snooping
Bandwidth Control
Port Mirror
Security
Power 1 (Green)
Power 2 (Green)
Fault (Red)
One RJ-45-to –RS-232 male connector for switch management
External Power Supply: DC 12~48V, Redundant power DC 12~48V and
connective removable terminal block for master and slave power
9.5 Watts (Full load)
Standard: -10 Degree C ~ 60 Degree C
5% to 95% (Non-condensing)
-40 Degree C ~ 85 Degree C
IP-30, 72mm (W) x 105mm (D) x 152mm (H)
Console, Telnet, Web Browser, SNMP v1, v2c and v3
Port disable/enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable. Bandwidth control on each port.
Display each port's speed duplex mode, link status, Flow control status. Auto
negotiation status
Port-Based VLAN, up to 9 VLAN groups
IEEE 802.1q Tagged Based VLAN , 4K VLAN ID, up to 256 VLAN groups
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree
Supports 12 groups of 8-Port trunk support
Traffic classification based on :
Port Number,
802.1Q Tag,
802.1p priority,
IP DSCP/TOS field in IP Packet
v1 and v2
256 multicast groups and IGMP query
Per port bandwidth control
Ingress: 500Kb~80Mbps
Egress: 64Kb~80Mbps
RX/TX/Both
Support 100 entries of MAC address for static MAC and another 100 for MAC filter
Support 10 IP addresses that have permission to access the switch management
and to prevent unauthorized intruder
10
User's Manual of ISW-1022M
Full duplex/Collision (Yellow)
SFP port: LNK/ACT(Green)
1000T: LNK/ACT(Green), 1000M(Green)
Advertisement
Table of Contents
