Table of Contents
Advertisement
Enter the configure
Global
command while in
Configuration
privileged EXEC
mode.
Enter the vlan
database command
VLAN database
while in privileged
EXEC mode.
Enter the interface
of fast Ethernet
Interface
command (with a
configuration
specific interface)
while in global
configuration mode.
To exit to
privileged EXEC
switch (config)#
mode, enter exit
or end
To exit to user
switch (vlan)#
EXEC mode,
enter exit.
To exit to global
configuration
mode, enter exit.
switch
To exit to
(config-if)#
privileged EXEC
mode, enter exit
or end.
32
User's Manual of ISW-1022M
• Display advanced function
status
• Save configuration
Use this mode to configure
those parameters that are
going to be applied to your
switch.
Use this mode to configure
VLAN-specific parameters.
Use this mode to configure
parameters for the switch and
Ethernet ports.
Advertisement
Table of Contents
