1. Package Contents Thank you for purchasing PLANET Industrial 8-Port 10/100TX + 2-Port Gigabit TP/SFP Combo Ethernet Switch, IFGS-1022TF. In the following sections, the term “Industrial Ethernet Switch” means the IFGS-1022TF. Open the box of the Industrial Ethernet Switch and carefully unpack it. The...
2. Product Specifications Product IFGS-1022TF Hardware Specifications Fast Ethernet Copper Ports 8 x 10/100BASE-TX RJ45 auto-MDI/MDI-X ports 2 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X Gigabit Ethernet Copper ports Ports (shared with Port 9 and Port 10) 2 x 1000BASE-SX/LX/BX SFP interfaces SFP Ports (shared with Port 9 and Port 10)
Page 5
Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE IEC60068-2-32 (free fall) Stability Testing IEC60068-2-27 (shock) IEC60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T Standards Compliance IEEE 802.3z Gigabit SX/LX IEEE 802.3x flow control and back pressure IEEE 802.1p Class of Service IEEE 802.3az Energy Efficient Ethernet (EEE) Environment Operating Temperature...
3. Hardware Introduction 3.1 Switch Front Panel The front panel of the Industrial Ethernet Switch consists of Ethernet interfaces and LED indicators. Front View P2 Alarm LNK/ACT 1000 IFGS-1022TF Figure 1: I FGS-1022TF Front View...
3.2 LED Definition System Color Function Green Lights to indicate power input 1 has power. Green Lights to indicate power input 2 has power. Alarm Lights: indicates either power 1 or power 2 has no power. Per 10/100BASE-TX Port Color Function Lights to indicate that the port is operating at...
, 0.8A max. AC Input: 24V , 0.4A max. Figure 1: IFGS-1022TF Top View 3.4 Wiring the Power Inputs The 6-contact terminal block connector on the top panel of Industrial Ethernet Switch is used for two redundant power inputs. Please follow the steps below to insert the power wire.
2. Tighten the wire-clamp screws for preventing the wires from loosening. Power 1 Alarm Power 2 1. The wire gauge for the terminal block should be in the range between 12 and 24 AWG. 2. The power input range is 9V ~ 48V DC and supports 24V AC. 3.5 Wiring the Fault Alarm Contact The fault alarm contacts are in the middle of the terminal block connector as the picture shows below.
DIN rail and wall. Please read this chapter completely before continuing. This following pictures show how to install the device. However, the device in the picture is not IFGS-1022TF. 4.1 DIN-rail Mounting Installation 4.2 Wall-mount Plate Mounting...
4.3 Side Wall-mount Plate Mounting 4.4 Grounding the Device User MUST complete grounding wired with the device; otherwise, a sudden lightning could cause fatal damage to the device. EMD (Lightning) DAMAGE IS NOT CONVERED UNDER WARRANTY. Max. Fault Alarm Loading: 24V, 1A 1 2 3 4 5 6 DC Input: 9- 48V , 0.8A max.
Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource on PLANET web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
Page 13
FCC Warning This equipment has been tested and found to comply with the regulations for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications.