Setting Reversal Direction Of Jog X; Setting The Auto Display Off; Initializing The Settings - MIMAKI UJF-7151 plus Operation Manual

Chapter 3 Setup

Setting reversal direction of JOG X

When setting the origin with the Jog keys, you can specify
the direction in which the table moves by pressing the Up/
Down key.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
X", and press the
• The setting of "Reverse JOG-X" is selected.
Press
3
press the
• When "ON" is selected, use
table to the back, and
• When "OFF" is selected, use
table to the front, and
Press the
4
end the setting.

Setting the Auto Display Off

The screen can be set to turn off automatically after a
certain period of time (30 minutes).
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press
2
Off", and press the
• The setting of "Auto Display Off" is selected.
Press
3
press the
• When set to "ON", the screen will automatically
turn off after a certain period of time (30 minutes)
has passed since the last keystroke was made.
• When the light is off, press any button on the
control panel to restore it.
• While the light is off, the excitation of the X- and
Y-axis motors is turned off in order to save power.
• When the light is turned off, the motor excitation is
restored.
Press the
4
end the setting.
3-28
(MENU) (>>)
to select "Reverse JOG-
key.
to select set value, and
key.
to move the
to move it to the front.
to move the
to move it to the back.
key several times to
(MENU) (>>)
to select "Auto Display
key.
to select set value, and
key.
key several times to

Initializing the Settings

You can return the setting of "SETUP", "MAINTENANCE"
and "MACHINE SETUP" to the status before shipment.
Press the
1
key in LOCAL.
• MACHINE SETUP MENU will be displayed.
Press the
2
Press to select "SETUP RESET" ,
3
and press the
Press the
4
• The already configured settings are initialized.
Press the
5
end the setting.
(MENU) (>>)
(<<) key.
key.
key.
key several times to