Carriage; About Table; About Tap Position - MIMAKI UJF-7151 plus Operation Manual

Chapter 1 Before Use

Carriage

A print head for printing, LED UV device, and a light pointer in
the print head cover are mounted on the carriage.

About table

It is necessary to adjust the table height depending on the media thickness because various media can be set for
printingprinting.
The specification of each table is as less:
Acceptable media
*1
weight
Vacuum function
Table movable area
Media thickness
*1. If you put a heavier thing than specified, the quality image may be degraded.

About tap position

The table and the vacuum table on which the media set have the M4 tap (47 positions) of the size below respectively.
• Although tap holes are open except the tap position in the printing (
Therefore, please do not use them.
• We may change the position except specified tap holes (
1-6
Table
UJF-7151 plus
10kg and less
Yes
0 to 153mm
0 to 153mm
UJF-7151 plusII
30kg and less
Yes
0 to 153mm
0 to 153mm
Table
), they are necessary in the production process.
) without prior notice.