Table of Contents
Advertisement
7
7
TROUBLE SHOOTING
TROUBLE SHOOTING
7-1 TROUBLE SHOOTING
PROBLEM
POSSIBLE CAUSE
LEDs are not
Reversed battery polarity.
illuminated.
(transmitter/receiver)
Low battery indicator
flickers even though
Reversed battery polarity.
the battery has been
inserted.
(transmitter/receiver)
Reflection from the floor or
wall.
Alarm is not output.
Beam has not been blocked.
Channels of transmitter
and receiver are different.
Multiple photoelectric
Alarm is kept
detector for long distance or
output.
beam stacking applications.
Optical alignment was not
performed properly.
Batteries are going
Tamper button has not
flat too quickly.
performed properly.
Frost, snow or
Optical alignment not
heavy rain causes
optimized.
false alarm.
The wiring is incorrect.
Improper output
Screws between the chassis
and the back box are loose.
Wall tamper does
not activate.
The waterproof packing on
back box is misplaced.
The wireless receiver
The radio waves are being
does not receive an
interrupted by a building.
alarm, or the
reception level is low.
A false alarm occurs
Heavy rain is blocking the
due to heavy rain, or
infrared beam or attenuating
the wireless receiver
radio waves.
does not receive the
alarm.
7
8
DIMENSIONS
TROUBLE SHOOTING
8-1 DIMENSIONS
162.5 (6.4)
88.1 (3.47)
9
CORRECTIVE ACTION
Check the battery polarity.
Check the battery polarity.
Align beams away from the
floor or wall.
Block all two beams.
Set the same channel to both
transmitter and receiver.
Set the combination of
channels as 1, 3, 2, 4 or 1, 4
See "4-2 OPTICAL
ALIGNMENT" on Page 9.
Set the cover, the main unit
and the back box to the
chassis properly.
See "4-2 OPTICAL
ALIGNMENT" on Page 9,
and make realignment.
Make correct wiring.
Tighten screws completely.
Remove chassis from the
back box and align the
waterproof packing onto the
chassis.
Change the intallation location
of AX-100/200TFRi or the
wireless receiver.
Change the intallation location
of AX-100/200TFRi or the
wireless receiver.
Unit: mm (inch)
-11-
SPECIFICATIONS
9-1 SPECIFICATIONS
Model
AX-100TFRi
Detection range
30 m (100 ft.)
Maximum arrival distance
265 m (870 ft.)
Detection method
Infrared beam interruption detection
Beam frequency selection
Variable between 50, 100, 250,
Interruption period
3.6 V 13.0 Ah: LSH20 lithium batteries
Power source
manifactured by SAFT (not installed)
660 A
Current draw
T:320 A + R: 340 A
(at 25°C, 3.6 VDC)
Transmitter
* Battery
Approx. 5 years
life
Receiver
Description
One-way binary RF Module
Model
RF
Manufacturer
module
902 - 928 MHz for North America
****
Frequency
option
921 - 928 MHz for New Zealand
(1) Light on - IR beam not received.
(2) Flickering light - IR beam not
Alarm indicator
(Receiver)
(3) Light off - IR beam received.
Indicator
Alarm indicator
(Transmitter)
Voltage reduction: flickering
Low battery
Operating temperature
20 C to 60 C ( 40 F to 140 F)
Operating ambient humidity
Alignment angle
Indoor/Outdoor, Wall/Pole/Tower
mounting (optional main unit maunting
Mounting
brackets are required, when the units
Dimensions
217 (8.5) x 88.1 (3.47) x 162.5 (6.4)
Weight
International protection
Specifications and design are subject to change without prior notice.
*
The value is based on the condition that it is used within the ambient
temprature range of 20 to 25 C.
**
The unit can be installed in a UL commercial, residential applications
and ULC residential installation.
*** The unit shall be tested at least once a year.
**** For UL and ULC installations Only the North America frequency is to be
used.
NOTE
These units are designed to detect an intruder and activate
an alarm control panel. Being only a part of a complete
system, we cannot accept responsibility for any damages
or other consequences resulting from an intrusion.
AX-200TFRi
60 m (200 ft.)
530 m (1 740 ft.)
4 channels
500 msec (4 steps)
845 A
T: 505 A + R: 340 A
(at 25°C, 3.6 VDC)
Approx. 3 years
Approx. 5 years
EN1941
INOVONICS
915 - 925 MHz for Australia
received sufficentlly.
Power ON: ON
Power OFF: OFF
95% (max.)
90 Horizontal, 5 Vertical
mount in the tower.)
H x W x D mm (inch.)
1 900 g (67.0 oz)
IP55
Advertisement
Table of Contents
