To Temporarily Cancel The Cruise Control; To Turn Off The Cruise Control; To Change The Cruising Speed - Subaru 2006 Baja Owner's Manual

When the accelerator pedal is released, the vehicle
will return to and maintain the previous cruising speed.
To temporarily cancel the cruise con-
trol
There are five ways to cancel the cruise control tem-
porarily:
Depress the brake pedal.
Pull the control lever in the "CANCEL" direction.
Depress the clutch pedal (manual transmission ve-
hicles only).
Shift the selector lever into the "N" position (auto-
matic transmission vehicles only).
Shift the shift lever into neutral position (manual
transmission vehicles only).
The " " indicator light in the combination meter
goes off when the cruise control is cancelled.
To resume the cruise control after it has been tempo-
rarily canceled and with vehicle speed of approximate-
ly 20 mph (32 km/h) or more, push the control lever up-
ward in the "ACCEL, RESUME" direction to return to
the original cruising speed automatically.
The " " indicator light in the combination meter
will automatically come on at this time.

To turn off the cruise control

There are two ways to turn off the cruise control:
Push the main switch again.
Turn the ignition switch to the "ACC" position (but
only when the vehicle is completely stopped).

To change the cruising speed

To increase the speed (by control lever)
Push the control lever upward in the "ACCEL, RE-
SUME" direction and hold it until the vehicle reaches
the desired speed. Then, release the control lever.
The vehicle speed at that moment will be memorized
and treated as the new set speed.
When the difference between the actual vehicle speed
and the set speed is less than 4 mph (6.8 km/h), the
set speed can be increased 1 mph (1.6 km/h) each
time by pressing the control lever upward in the "AC-
CEL, RESUME" direction quickly.
To increase the speed (by accelerator pedal)
1. Depress the accelerator pedal to accelerate the ve-
hicle to the desired speed.
2. Push the control lever downward in the "SET,
COAST" direction once. Now the desired speed is set
and the vehicle will keep running at that speed without
Starting and operating
– CONTINUED –
7-39