Subaru 2006 Baja Owner's Manual page 197

Audio
Tone control
The volume control dial (1) normally function as vol-
ume control. The dial become a control for Bass,
Midrange or Treble when you select the appropriate
tone control mode.
Choose desired volume level for each mode by turning
the volume control dial. The control function returns to
volume control mode after approximately 5 seconds.
To change control modes: Each brief press of the
"AUDIO" button (2) changes control modes in the fol-
lowing sequence starting from bass control mode.
(When the radio is first turned on, the control mode is
in the volume control.)
Bass Midrange
Fader and balance control
The volume control dial (1) normally function as vol-
ume control. The dial become the controls for Fader or
Balance when you select the appropriate fader and
balance control mode.
Choose desired setting for each mode by turning the
volume control dial. The control function returns to vol-
ume control mode after approximately 5 seconds.
To change control modes: Each brief press of the
5-20
Treble Volume
"BAL" button (3) changes control modes in the follow-
ing sequence starting from fader control mode. (When
the radio is turned on, the control mode is in the vol-
ume control.)
Fader Balance
Display illumination dimness cancellation
(BRIGHT)
The brightness of the radio display dims when the light
switch is in the " " or "
makes the display difficult to read, press the volume
dial for more than 1.5 seconds to return the display to
original brightness.
Subsequently pressing the volume dial again for more
than 1.5 seconds or if you can safely do so, turning the
light switch to the OFF position and back to the
" " or " " position makes the radio display
dim again.
FM/AM selection button
FM button
Press the "FM" button (4) for FM reception. The radio
will toggle between FM1 and FM2 settings each time
the "FM" button (4) is subsequently pressed.
Volume
" positions. If this