Removal And Installation Of The Hard Bed Cover - Subaru 2006 Baja Owner's Manual

Interior and exterior equipments
ly locked.
If this does not lock the cover, release it from a slightly
higher position. Do not push the cover forcibly to lock
it.
Removal and installation of the hard
bed cover
1
1) Brackets
When removing the bed cover, never remove
the brackets shown in the above drawing.
6-32
Removal and installation work should be per-
formed by at least two adults.
During the removal and installation work, be
careful not to trap your fingers between the
cover and cargo bed.
The bed cover can be removed and reinstalled as de-
sired.
Removal
1. Open the front section of the cover. (Refer to
"Opening and closing the hard bed cover" in this sec-
tion.)
2. Take out the wheel nut wrench from the tool bag.
(Refer to "Jack and tools" section in chapter 9.)
UB6075BA