Cleaning Aluminum Wheels; Cleaning Front Fog Light Lens - Subaru 2006 Baja Owner's Manual

Appearance care

Cleaning aluminum wheels

Promptly wipe the aluminum wheels clean of any
kind of grime or agent. If dirt is left on too long, it may
be difficult to clean off.
Do not use soap containing grit to clean the wheels.
Be sure to use a neutral cleaning agent, and later rinse
thoroughly with water. Do not clean the wheels with a
stiff brush or expose them to a high-speed washing
device.
Clean the vehicle (including the aluminum wheels)
with water as soon as possible when it has been
splashed with sea water, exposed to sea breezes, or
driven on roads treated with salt or other agents.

Cleaning front fog light lens

1. Stop the vehicle in a safe place.
2. Stop the engine and turn off the front fog lights.
10-4
1
2
1) Counter-clockwise
2) Light lens horizontal center line
3. Check that the front fog lights are not hot. Then,
grasp the protector and turn it approximately 10°
counter-clockwise.
4. Pull the protector off the front fog light.
5. Wash the lens with water.
6. Apply the protector to the lens at an angle of ap-
proximately 10° from the front fog light's horizontal
center line. Then, turn the protector clockwise until it
stops. Finally, check that the protector's horizontal
bars are parallel with the front fog light's horizontal
center line.
10
UBA017BB