2. Separate the case.
3. Remove the old battery from the holder.
UB2209BA
1) Negative (–) side facing up
4. Replace with a new battery (Type CR2025 or
equivalent) making sure to install the new battery with
the negative (–) side facing up.
5. Reinstall the back half of the transmitter case by
snapping it back on.
After the battery is replaced, the transmitter must
be synchronized with the keyless entry system's
control unit. Press either the "
ton six times to synchronize the unit.
Keys and doors
1
200717
" or "
" but-
– CONTINUED –
2-11