Selector Lever - Subaru 2006 Baja Owner's Manual

Table of Contents

Advertisement

When parking the vehicle, first securely apply
the parking brake and then place the selector
lever in the "P" position. Avoid parking for a
long time with the selector lever in any other
position as doing so could result in a dead bat-
tery.
The automatic transmission is electronically controlled
and provides 4 forward speeds and 1 reverse speed.
NOTE
When the engine coolant temperature is still
low, your vehicle's automatic transmission will
up-shift at higher engine speeds than when the
coolant temperature is sufficiently high in order to
shorten the warm-up time and improve driveabili-
ty. The gearshift timing will automatically shift to
the normal timing after the engine has warmed up.
Immediately after a disconnected battery is re-
connected or ATF (automatic transmission fluid)
is replaced, you may feel that the automatic trans-
mission operation is somewhat unusual.
This results from invalidation of data the on-board
computer has collected and stored in memory to
allow the transmission to shift at the most appro-
priate times for the current condition of your vehi-
cle. Optimized shifting will be restored as the vehi-
cle continues to be driven for a while.

Selector lever

P
R
N
D
3
2
1
Starting and operating
HS7009AA
– CONTINUED –
7-15

Advertisement

Table of Contents
loading

Table of Contents