Cover Reinstallation - Subaru 2006 Baja Owner's Manual

The soft portion of the bed cover can be removed from
the bed cover's hard section for cleaning or storage.
Unfasten the Velcro on the tube closeout wraps and
firmly pull the cover out to one side.

Cover reinstallation

The soft portion of the bed cover can be reinstalled
onto the bed cover's hard section. Start by inserting
the left front edge of the soft portion into the right side
of the hard cover. This area is flared out to ease instal-
lation.
As you insert (and pull) the soft portion of the bed cov-
er into the bed cover's hard section, make sure the
next 10 to 15 inches (250 to 380 mm) of the soft por-
tion are straight and ready to enter the flared out por-
tion of the hard section.
UB6037BA
Once you have pulled the soft portion of the bed cover
onto the bed cover's hard section, make sure the soft
portion is equally centered on both sides. To complete
the installation, refer to "Securing the cover" section in
this chapter.
Interior and exterior equipments
UB6038BA
– CONTINUED –
6-23